Audio Technica AT-OC9XEB
Dual Moving Coil Stereo Pickup with Mounted Elliptical Stylus
Elliptical Needle with Aluminum Grip and Needle Holder
Neodymium Magnet and Pure Iron Yoke for Higher Magnetic Energy
Aluminum Housing Minimizes Unwanted Vibrations for Lower Resonances and Excellent Audio Reproduction
Pure Ohno Continuous Casting Copper (PCOCC) - High-purity spiral wire for the best possible signal quality
Excellent, affordable entry into the world of moving coil pickups.
The AT-OC9X Series is the latest generation of Audio-Technica's successful AT-OC9 Series, a pioneer in phono cartridges.
The new pickups are offered with a variety of stylus types: Elliptical/Casted, Elliptical/Naked, Microlinear, Shibata, and Special Line Contact.
Moving coil pickup with wide frequency response and excellent channel separation (distribution of audio information for the left and right channels) - for a particularly clean stereo image.
Pure Ohno Continuous Casting Copper (PCOCC): High-purity spiral wire for the best possible signal quality.
Threaded holes in the pickup housing for quick and easy installation on a headshell or integrated tonearm with just two M2.6 screws, no nuts.
AT-OC9XEB AND AT-OC9XEN models with aluminum needle holder.
Neodymium magnet and pure iron yoke (AT-OC9XEB AND AT-OC9XEN models)
for greater magnetic energy.
The aluminum housing minimizes unwanted vibrations, for lower resonances and excellent audio reproduction.
Technical data
Frequency range 20 - 30,000 Hz
Channel separation 25dB (1kHz)
Vertical scan angle 20°
Vertical tracking force 1.8 to 2.2 g (standard 2.0 g)
Needle shaft shape round
Recommended load impedance > 100Ω
Coil impedance 12Ω (1kHz)
DC resistance 12Ω
Coil inductance 25μH (1kHz)
Output power 0.32 mV (1kHz at 5 cm/sec.)
Output channel balance 1.5 dB (1kHz)
Needle cut elliptical
Needle holder hollow aluminum
Static needle compliance 20×10-6 cm/dyne
Dynamic needle compliance 9×10-6 cm/dyne (100 Hz)
Half inch lock
Dimensions H17.3 × W16.8 × D25.7 mm
Included accessories 1 non-magnetic screwdriver
1 brush
2 washers
4 pairs of mounting screws (M2.6):
5 mm, 8 mm, 10 mm, 12 mm
1 protective cap (plastic)
Material d. Housing Aluminum
Needle bending radius 0.3 x 0.7 mil
Connection pins Brass
Dual voice coil type
coil wire Pure Ohno Continuous Casting (PCOCC) copper: High-purity spiral wire for the best possible signal quality
Weight 7.6 g
There are currently no product reviews.
Write Review
Welcome to the Webshop
The NOStubeshop webshop, an old "love" of the electron tube technology and its relation to rebirth, I created because of the needs that.
I thought that a lot of like-minded people rarely have the opportunity to visit these shops, on the one hand the lack of time and because there are very few of these shops. The Internet is now available everywhere in the postal courier companies to deliver it to all the goods.
Present specialties in itself.
Many old vacuum tube (NOS or operational use), is still not readily available, even from these few pieces trying to make up for the horrific prices instead áron.Segítek solid construction and repair advice is dealing with pipes for 40 years. In any case, I check the pipes IL-14 military vacuum tube tester and if needed also paired quad-sorting.
after prior appointment it is possible to choose goods on site as well.
I wish you a good time and all of our internet users purchase online store.
Thank interests.
Details of small business:
Name: Lajos Katona NOStubeshop
Owner: Lajos Katona
ID: 50518265
VAT number: 67627561-1-29
Statistical code: 67627561-7312-231-09
Account number: (K & H Bank) Katona Lajos
HU81 10403459-71505453-54531011
SWIFT/BIC : OKHBHUHB
Headquarters: 4150 Püspökladány Jókai utca 47
Phone: +3670/3661300
Email: soldier67.ls@gmail.com
The online store is not operates as a general store, there is no opening hours, but after prior consultation with Email Features are also personal purchases.
Sincerely
Lajos Katona
NOStubeshop.com